Barrier Forms

New Jersey Style Metal Barrier Form Setup

Click on Image to Enlarge

A.  Top Spacers:  (Adjustable from 6 - 12") assures uniform top thickness

B.  Gussets are full height to maximize support and rigidity of each form

C.  Form Aligner Assembly provides both vertical and horizontal form alignment

 

Punching:

  • Top tread punched with four holes to receive doweled top spacers or for the addition of top riser forms.
  • Base punched with four holes to facilitate anchoring, for the addition of bottom riser forms or for stacking on top of paving form.
  • Face punched with four holes to facilitate the use of horizontal ties.

Optional:

  • Moment Arms: (adjustable from 6" to 12") provides positive form alignment. These arms are designed for interchangeable use on either a double contour set-up or on a single contour set-up with a straight back.

Concrete Barrier Form Setup with Moment Arm32" Barrier Forms with Moment Arms

 

  • Tie Pockets: Protects the side forms. Horizontal tie rods bear against the pocket instead of the face of the forms. 
  • Leveling Bolts: Convenient method for setting the base of the form to grade. 
  • Fractional Lengths
  • Bulkhead Plates
  • Riser Forms
  • Special Punching
  • Fixed or Adjustable Chamfer

Metal Forms Corporation Barrier Forms - Simplified General Shapes of Forms

Contour Concrete Metal Form with V-bend Contour Metal Concrete Form with Radius Bend Straight Concrete Metal Form - Vertical Straight Steel Concrete Barrier Form with Offset
Contour Forms with V-bend Contour Forms with Radius  Straight Form Vertical  Straight Form with offset
Job Site Images:
Metal Concrete Barrier Forms in Use
Concrete Metal Barrier Forms
Concrete Metal Barrier Forms used on the Marquette Interchange
Steel Barrier Parapet Concrete Forms Moment Arms Setup
Bridge Parapet Concrete Form